Technical Data; Indicators On The Remote; Status Indicator - FAZUA RIDE 50 TRAIL Notice Originale

2 2 TECHNICAL DATA

TECHNICAL DATA OF THE REMOTE
Model designations
Degree of protection
(in assembled condition)
Weight, approx.
Operating temperature
Storage temperature (< 1 month)
Storage temperature (> 1 month)

23 INDICATORS ON THE REMOTE

The LED display [C.5]/[C.6] on the REMOTE consists of 5 LEDs.
• All five LEDs [C.5] together serve as an indicator for the charge level and the
preset pedal support level.
• The upper of the five LEDs [C.6] also serves as a status indicator, informing you
about the status of your e-bike.

23.1 Status indicator

The status indicator [C.6] indicates a status change or a pending fault. If no fault
is detected, the status indicator LED will act as one of the five LEDs [C.6] to indi-
cate the charge level or preset support level.
Depending on which status is displayed, the LED of the status indicator lights up
in different colors.
The status indicator [C.6]:
• flashes green or blue*= "Ready for operation"
After successful installation of the Drivepack in the e-bike, the status indicator
flashes green or blue briefly to indicate that you can now switch on the drive
system using the REMOTE.
* The color for the "Ready for operation" status is either green or blue, depending on the model.
116
US-English | Original instructions
REMOTE FX
→
REMOTE BX
REMOTE RX
→
IP54
→
0.106 lbs (0.048 kg)
23 °F to 104 °F (-5 °C to +40 °C)
→
(ambient temperature)
→
5 °F to 140 °F (-15 °C to +60 °C)
→
5 °F to 77 °F (-15 °C to +25 °C)