Inserting/Removing The Battery Pack - FAZUA PEDELEC Notice Originale

EN
Assembly

Inserting/removing the Battery Pack

To insert/remove the Battery Pack in/from the eBike, follow the Battery Pack
Instructions.
Mounting the Drivepack in the eBike
After inserting the Battery Pack in the Drivepack (1) (see the Battery Pack
Instructions), lay the interface to Bottom Bracket (3) over the open interface
on your Bottom Bracket (Action A, Step 1). right underneath your eBike
downtube.
Now bring the upper part of the Drivepack (1) inside the downtube until the
fastening hook (8) hooks in (Action A, Step 2). Make sure the Drivepack (1) is
tightly anchored within the downtube and does not come out.
Dismounting the Drivepack from the eBike
Important! Make sure that you are holding your Drivepack (1)
when dismounting it, otherwise the Drivepack (1) may fall freely
from the frame.
Hold the mounted Drivepack (1) with one hand and press the release
button (6) with the other hand (Action B, Step 1). You can now remove the
Drivepack (1) easily (Action B, Step 2).
Note! Sometimes pushing up the Drivepack (1) against the frame
before pressing the release button (6) may result in a smoother
dismounting.
8