Risk of burns!
The cooling unit on the DRIVEPACK can become very hot during oper-
ation and you may burn yourself when touching it.
►Handle the DRIVEPACK with care.
►Allow the DRIVEPACK to cool completely before touching the
DRIVEPACK.
Risk of damage!
Improper handling can damage the drive system or individual compo-
nents.
►Have individual components of the drive system and the e-bike
replaced exclusively by identical components or other components
expressly approved by the e-bike manufacturer. This will protect
the other components or your e-bike from possible damage.
►Never use your e-bike without a DRIVEPACK or without a cover if
you use it as a conventional bicycle without a DRIVEPACK.
►Remove the BATTERY before cleaning the DRIVEPACK and allow all
components to dry completely before inserting. If the BATTERY
comes into contact with damp or wet contacts on the DRIVEPACK
during insertion, the BATTERY may be damaged.
►When charging the BATTERY, make sure that the mains cable and
charger cable on the CHARGER do not pose a tripping hazard to
prevent components from being damaged, e.g. resulting from a
fall.
►Always make sure that the cover flap on the BATTERY is closed
correctly and completely to ensure that no dust or splash water
can enter the charging socket.
84
WARNING
NOTE
English | Original instructions