Charging The Battery Pack - FAZUA evation 1.0 Notice Originale

EN
Description and
Specifications
Features
The numbering refers to the illustrations shown at the beginning of the manual.
The illustrations show the different components belonging to the Battery Pack.
Individual illustrations in the manual might differ slightly from the real parts
depending on the equipment of your eBike.
1.
Battery Pack
2.
On/Off Button
3.
Operation and charge-control indicator
4.
Socket for charge connector
5.
Connector to Drivepack
6.
Fastening lid
7.
Drivepack
8.
Battery slot
Specifications
Lithium-ion Battery Pack 7000
Article number
Rated voltage
Rated capacity
Energy
Operating temperature
Storage temperature
Discharge temperature
Charging temperature
Degree of protection
Weight , approx.
* Exceeding these limits might lead to power derating.
34
01-2018-004
V 36
Ah 7
Wh 252
°C -20 ... +60
°C -20 ... +60
°C -20... +60
°C 0 ... +45
IP 54
kg 1.4
Assembly
Warning! Read carefully and observe the Battery Pack (1)
Instructions.
Warning! Pay attention to your Battery Pack (1) before each use
and before charging. Make sure terminals and surfaces are clean.
Warning! Before using or charging your Battery Pack (1),
always look for signs of damage like cracks or burns. Never
use or charge a damaged Battery Pack (1). Please contact
your FAZUA Service Partner or visit the FAZUA Service Platform
(www.fazua.com/service).
First check of the Battery Pack
Check your Battery Pack (1) before charging it or using it for the first time.
Press the on/off button (2) on your Battery Pack (1). If all LEDs of the charge-
control indicator (3) are not lit, then fully charge the Battery Pack before first
use. If no LED of the charge-control indicator (3) lights up, your Battery Pack
(1) is possibly damaged.
After the first use, and before each use, always switch on your Battery Pack (1)
by pushing the on/off button (2).

Charging the Battery Pack

Important! Read carefully the instructions of the Charger before
proceeding with the first charge.
The Battery Pack (1) can be recharged at any time on its own, within a
Drivepack, or within your eBike(see Drivepack Assembly Instructions).
The charging process can be interrupted at at any moment.
To ensure the full Battery Pack (1) capacity, charge your Battery Pack (1)
before the first use until full charge.
EN
35