Handling Steps Before Or During The Trip; Important - FAZUA evation Guide De Démarrage Rapide

Handling steps before or during the trip

→ see figures page 8.
Insert battery
1. Make sure that the battery is undamaged (visual check).
2. Press the on/off button D4 1×, to turn on the battery.
3. Carefully insert the battery as far as possible into the battery
holder A2 .
The battery is automatically locked when you have inserted it correctly.
IMPORTANT: Do not use the drive system if the battery cannot be
locked.
Remove battery
1. Secure the battery with one hand and press the push button D2 ,
with the other hand to release the battery from the lock.
2. Hold down the push button D2 , grasp the battery on the two side
handles and gently pull the battery out of the battery holder A2 .
Insert drivepack
1. Place the drivepack on the interface B1 of the bottom bracket.
2. Swing the upper end of the drivepack into the down tube.
The drivepack is automatically locked in the locker when you have
correctly placed the drivepack and completely swiveled it into the
intended position in the down tube.
The push button A3.1 or the locking lever A3.2 automatically moves
into the closed position.
3. Check the drivepack makes a tight fit.
IMPORTANT: Do not use the drive system if the drivepack cannot be
locked to the eBike.
D A
in drivepack
D
from drivepack
A
(inc. battery) in eBike (→ Figure 2)
(→ Figure 1)
A
(→ Figure 1)
EN
9