FAZUA RIDE 50 TRAIL Notice Originale page 125

Original instructions | US-English
The BATTERY is designed so that it can only be inserted into the battery holder
when correctly aligned. So if you have problems inserting the BATTERY into the
battery holder, it may be because you have not aligned the BATTERY correctly.
In this case, first check that the BATTERY is aligned correctly and attempt to
insert it again.
If the BATTERY cannot be inserted into the battery holder despite correct
alignment, this may indicate that one of the components is damaged.
Do not use the drive system if the BATTERY cannot be inserted into the battery
holder but contact an authorized specialist.
3. Carefully insert the BATTERY as far as possible into the battery holder of the
DRIVEPACK.
If you have correctly inserted the DRIVEPACK all the way into the battery holder,
the push button on the BATTERY slides into the corresponding opening on the
DRIVEPACK and locks the BATTERY in position. When the push button on the
BATTERY engages in the opening on the DRIVEPACK, you will hear an audible click.
If the BATTERY does not lock in position, pull it out again and check that there
is no dirt inside the DRIVEPACK preventing it from being inserted, and attempt
to insert the BATTERY again. Do not use the drive system if the BATTERY cannot
be locked but contact an authorized specialist to have the fault rectified.
D.2
A.4
D.1
D.1
125