Cleaning And Maintaining Components; Risk Of Injury - FAZUA RIDE 50 TRAIL Notice Originale

7.2 Cleaning and maintaining components

Risk of injury!

If the drive system is set in motion while you are handling it, you may
trap your fingers or otherwise injure yourself.
►Remove the DRIVEPACK from the e-bike when cleaning the e-bike
or the drive system components.
Risk of damage!
Improper cleaning may damage the drive system or individual
components.
►Never immerse the drive system components in water or other
liquids for cleaning.
►Do not use aggressive cleaning agents for cleaning.
►Do not use sharp, angular or metallic cleaning objects when
cleaning.
►Never clean the drive system components with a hard water jet or
a high-pressure cleaner.
Always keep all components of the e-bike and the drive system in a clean condi-
→
tion.
Clean the components gently with a cloth or soft brush.
→
Wipe all surfaces and components dry after cleaning.
→
Pay particular attention to the contacts and interfaces between BATTERY and
→
DRIVEPACK and between DRIVEPACK and BOTTOM BRACKET: The interfaces must
not be soiled or contaminated and must be completely dried before inserting
the components to avoid damage.
Clean the cooling unit on the DRIVEPACK regularly.
→
Do not wait until the cooling unit is visibly or heavily soiled before cleaning it!
98
CAUTION
NOTE
English | Original instructions