Intended Use - DT SWISS R 535 ONE Mode D'emploi

Masquer les pouces Voir aussi pour R 535 ONE:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21

INTENDED USE

Category 1: Riding on paved roads
This is a set of conditions for the operation of a bicycle and its components on a
regular paved surface where the tires are intended to maintain ground contact.
Category 2: Riding on- and offroad with drops up to 15 cm (6 in.)
This is a set of conditions for the operation of a bicycle and its components that
includes category 1 as well as unpaved and gravel roads and trails with moderate
grades. In this set of conditions, contact with irregular terrain and loss of tire con-
tact with the ground may occur. Drops are intended to be limited to 15 cm (6 in.)
or less.
Category 3: Riding in rough terrain and drops up to 61 cm (24 in.)
This is a set of conditions for operation of a bicycle and its components that inclu-
des category 1 and 2 as well as rough trails, rough unpaved roads, and rough ter-
rain and unimproved trails that require technical skills. Jumps and drops are
intended to be less than 61 cm (24 in.).
Category 4: Riding in rough terrain and drops up to 122 cm (48 in.)
This is a set of conditions for operation of a bicycle and its components that inclu-
des category 1, 2, and 3, or downhill grades on rough trails at speeds less than
40 km /h (25 mph), or both. Jumps are intended to be less than 122 cm (48 in.).
Category 5: Extreme riding (Downhill, Freeride)
This is a set of conditions for operation of a bicycle and its components that inclu-
des category 1, 2, 3, and 4, extreme jumping or downhill grades on rough trails at
speeds in excess of 40 km/h (25 mph) or a combination thereof.
71

Publicité

Table des Matières
loading

Table des Matières