Marshall ORIGIN 20 Mode D'emploi page 4

ENGLISH
Available in both 20W and 50W power
outputs and as either a head or combo,
every Origin has been designed to offer
the perfect solution for players looking
to create great music.
The tone of the Origin amplifier is
unmistakeably Marshall using 3x ECC83
preamp valves and 2x EL34 power
valves to generate rich harmonics and
exceptional tone. While the amplifier is a
single channel unit, the design of the tone
circuit means it offers two very distinctive
voices. Accessing your preferred sound
can be easily achieved using the inbuilt tilt
control which when turned fully counter
clockwise will access a subtler tonal
structure. Dialling the tilt control fully
clockwise will increase the brightness of
sound for a more cutting tone. A presence
control also allows fine tuning of your tone
in the power stage for even greater tonal
detailing.
2.0
OVERVIEW AND SPECIFICATION
The combo enclosures and speaker
choices have been carefully selected to
bring out the natural valve tone with the
20W combo being loaded with a Celestion
V Type 10" speaker and the 50W Combo
using a Celestion Midnight 60 12"
speaker.
Additional functionality such as the foot
switch gain boost, effects loop, and ability to
run the amplifiers without a speaker load,
make the Origin range exceptional for the
modern player.
ORIGIN 20
VALVES
3x ECC83 + 2x EL34
SPEAKER
Celestion V Type 10"
(Combo only)
POWER CONTROL
3 way switchable
High, mid and low
TILT CONTROL
Single channel control
Adjust between normal and high treble
EQUALISATION
Treble, middle and bass
FOOTSWITCHABLE FEATURES
Effects loop
Gain boost
ORIGIN 50
VALVES
3x ECC83 + 2x EL34
SPEAKER
Celestion Midnight 60 12"
(Combo only)
POWER CONTROL
3 way switchable
High, mid and low
TILT CONTROL
Single channel control
Adjust between normal and high treble
EQUALISATION
Treble, middle and bass
FOOTSWITCHABLE FEATURES
Effects loop
Gain boost