Maintenance. Cleaning And Care - SPORTSTECH IT300 Mode D'emploi

7. MAINTENANCE. CLEANING AND CARE

•
This appliance has been tested and it complies with standard EN ISO 20957-1:
2013 Class H.
• Make sure that all bolts/nuts are correctly tightened after assembly and before use.
•
Clean the unit regulary with a slightly damp cloth and a mild cleaning agent. Do not
use any solvents to clean the unit.
•
This applies to the padding and handles especially since these parts are in constant
contact with your body during training. You can cover the pads with a towel during
training to protect them.
•
Check all rollers for ease of movement before use. Rollers that move with difficulty
result in excessive wear and / or damage to the cables. If one or more rollers is
tight, make sure they are installed correctly. Never grease the contact area between
the roller and the cable! If in doubt, please do not hesitate to contact our customer
service.
•
Maintain the weight guide tube regularly using a little silicone oil.
• You should grease the axles of all moving parts once every one or two years. You can
use an off-the-shelf grease to do so.
37