Cardin Elettronica PGM486 Mode D'emploi page 24

46
INSERT PIN
:-----------?
47
WRONG PIN!
WAIT.....
48
! ACCESS !
! VIOLATION !
>>WAIT.....
49
! ATTENTION !
PIN CODE BLOCK
SETTINGS
50
A - NONE
B - PGM
C - CODE MEMORY
D - PGM+MEMORY
51
CODE MEMORY:
PIN REMOVAL:
52
CODE MEMORY:
PIN INSERTION:
53
A - ITALIANO
B - FRANCAIS
C - ENGLISH
D - DEUTSCH
!!! ATTENTION !!!
BEFORE STARTING TO USE THE PGM486 READ THE
FOLLOWING NOTES CAREFULLY:
THE SETTINGS AND PERSONALISATION ARE AIMED
AT THE CORRECT USE OF THE DEVICE.
SELECTING THE LANGUAGES FOR THE MESSAGES :
To access the language function press button "D" ("EDIT") while
you start up the Palm. A menu with four possible languages
will be shown. They can be selected by pressing "A", "B", "C",
"D". The chosen language will be indicated by the symbol "
Once you have selected the language press "ENT" to activate
the setting. The Palm will restart with the new function. The
language default setting is Italian but this may be modified at
any given moment.
The Palm protection function is active. To use it you must insert the PIN code. If the code
is correct you may proceed, ptherwise you will be asked to reinsert the code.
The inserted PIN is not correct and you will not be able to use the PGM. This message will
start a 6 second pause time before you can reinsert the number (menu nr. 46): This makes
unauthorised access even more difficult.
This indicates that an attempt to access the PGM by an unauthorised (incorrect PIN code)
person has taken place.
This indication is displayed for 6 seconds after which you will be asked to input the PIN
again (menu nr. 46). This will be displayed each time you start up the Palm until you insert
a correct PIN code.
This indicates that you are modifying the PGM PIN code management settings. It is
accompanied by a series of "beeps" and is shown whenever you enter the selection menu
and each time you change the settings.
Setting menu for PGM PIN code management.
The active setting is indicated by the symbol "
you change the settings message 49 will be shown. To confirm press "ENT", to cancel
press "ESC". If the configuration has been modified you will be moved back to menu nr. 2
accompanied by eight "beeps".
Indicates that all references to the PIN code have been removed from memory.
Indicates that the memory has been identified by inserting the PIn code in the Palm.
Select the language in which the messages on the display will be shown. Press the cor-
responding button to make the selection and the symbol "
language on the right of the display. Press "ENT" to confirm the selection.
SECTION 2
S486 PERSONALISATION
".
*
24
*
"on the corresponding line. Each time
*
" will appear by the chosen
HOLD DOWN THE "D"
A
BUTTON WHILE YOU
SWITCH ON THE PGM
D D
*
A - ITALIANO
B - FRANÇAIS
C
C - ENGLISH
D - DEUTSCH
ENT ENT
CARDIN EL. SPA
ENT
ENT
PGM449/PGM486
V 2.0
A - TX/RX S449/S486
ESC ESC
B - MEMORY
C - ADVANCED FUNCTIONS
PROCEDE WITH THE
PERSONALISED
SETTINGS
*
A - ITALIANO
A
B - FRANÇAIS
C - ENGLISH
D - DEUTSCH
A - ITALIANO
*
B B
B - FRANÇAIS
C - ENGLISH
D - DEUTSCH
A - ITALIANO
C B - FRANÇAIS
*
C - ENGLISH
D - DEUTSCH
A - ITALIANO
B - FRANÇAIS
D
D
C - ENGLISH
*
D - DEUTSCH
MOVES YOU TO THE
MAIN MENU FOR THE
NORMAL FUNCTIONS.