Cycle Operation - Alliance Laundry Systems FLW1548C SVG Guide De L'utilisateur

Cycle Operation

The cycles of your washer include several different stages. Refer to
the table below for what can be expected during the cycles that you
select.
The washer operates by gently tumbling the clothing through the
water. The wash action consists of a period of tumbling in one direc-
tion, a brief pause, and then a reverse tumble in the opposite direc-
tion. The pauses are part of the tumble action and add to the
unique cleaning capabilities of the washer. They are part of the cy-
cle.
The wash and rinse spins utilize a "ramp spin" action. The wash drum
starts rotating clockwise at a low speed and then gradually spins
up to higher speeds to efficiently extract water.
Heavy Duty, Whites, Normal Eco, Perm Press, Bulky and Quick Wash Cycles
Cycle Stage
Initial Drain
Wetting
Soak
Pre-Wash
Wash
Spin
Rinse
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
Activity
Drain 0:10
Fill/Tumble 2:30
Fill/Tumble/Soak 34:00
Fill/Tumble 7:00
Fill/Tumble Heavy Duty = 15:00
Whites = 20:00
Perm Press = 12:00
Normal Eco = 14:00
Bulky = 11:00
Quick Wash = 4:00
Spin 4:35
Fill/Tumble 3:25
The cycle stages are dependent on the cycle, selections and op-
tions chosen.
The times listed are approximate and will vary depending on the se-
lections and options chosen.
NOTE: The rinse water temperature will be cold, includ-
ing when optional rinses are selected.
NOTE: If No Spin is selected, all spin stages are one mi-
nute of drain and tumble.
Time (minutes)
Off
Wetting Agitate
Low Agitate, Off, Soak
Agitate, Off, Distribute
Regular Agitate, Dis-
tribute
Heavy Duty = Regular
Agitate, Distribute
Whites = Regular Agi-
tate, Distribute
Perm Press = Regular
Agitate, Distribute
Normal Eco = Regular
Agitate, Distribute
Bulky = Regular Agitate,
Distribute
Quick Wash = Regular
Agitate, Distribute
Ramp Spin
Regular Agitate, Dis-
tribute
16
Speed Comments
Removes water that
might be left over from
previous cycle
Option
Option
Not active in Quick
Wash Cycle
Table continues...
Part No. 806630EN
Cycle Operation