Options; Status; To Wash Clothes - Alliance Laundry Systems FLW1548C SVG Guide De L'utilisateur

No
Cycle Spin
Bulky 0
Quick Wash 0
Rinse & Spin 0
Spin 0
Soil Level
Changing the Soil Level keypad will add more wash time to the cycle.
Choose Light, Medium, Heavy or Max according to the amount of
soil in the laundry load.

Options

The following options can be used to modify the currently chosen
cycle, signal volume and control lock.
Soak
The Soak option adds a 30 minute soak to the beginning of the cy-
cle. During the soak period, the wash basket will rotate every few
minutes to tumble the laundry.
Pre-Wash
The Pre-Wash option adds a second wash to the selected cycle.
Second Rinse
This Option will provide an additional rinse to the selected cycle. The
water temperature will be cold.
Third Rinse
The Third Rinse Option provides two additional rinses. It is useful
for detergent sensitive skin. The water temperature will be cold.
NOTE: If Second Rinse and Third Rinse are both selec-
ted, the cycle will provide a total of three additional rin-
ses.
Delay Start
Pressing the Delay Start Option will allow the cycle to begin up to
24 hours after pressing the keypad. Pressing it once will delay the
cycle by one hour and 1h will show on the control' s display. Press
the Delay Start keypad again to increase the time by one hour each
press. Press the Start/Pause keypad to begin the countdown.
While setting the Delay Start Option, the cycle time and the Delay
Start keypad light will flash (1 second on/off).
After the Delay Start Option is started, the Delay Start keypad
light will flash (1 second on/off).
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
Low Medium
400 475 550
800 1000 1200
650 1000 1200
650 1000 1200
Signal
High
Pressing the Signal keypad will change the end of cycle signal vol-
ume. There are four settings: Off, Low, Medium, High.
Control Lock (Secure keypad)
Pressing and holding the Signal keypad for three seconds will turn
on the Control Lock. The Control Lock status light will be lit. While
Control Lock is on, no other keypad presses are allowed. Press and
hold the Signal keypad again to turn the option off.

Status

The Status lights are lit during the cycle to show what part of the
cycle is running.
Wash
Rinse
Spin
Door Lock
While the door is locking, the door lock status light flashes (1 sec-
ond on/1 second off). While unlocking, the door lock status light
stays lit and the cycle time flashes (1 second on/1 second off).

To Wash Clothes

IMPORTANT: Before using your new washer, make sure
the washer cord is connected to an appropriate electrical
outlet that is properly installed and connected to a pro-
tective earth/ground. Make sure the washer hoses are
connected to the hot and cold water faucets, and that the
faucets are turned on. Be sure the drain hose is not
kinked and is inserted into a drain. Refer to the INSTAL-
LATION INSTRUCTIONS for details of proper washer in-
stallation.
IMPORTANT: Prior to first wash, use an all purpose
cleaner, or a detergent and water solution, and a damp
cloth to remove shipping dust from inside of wash drum.
13
Control Panel
The Wash status light is lit
during the wash portion of the
cycle including Pre-Wash and
Soak, if selected.
The Rinse status light is lit
during the rinse portions of
the cycle including Second
Rinse and Third Rinse, if selec-
ted.
The Spin status light is lit
during the final spin portion of
the cycle.
The Door Lock status light is
lit whenever the door is locked.
The door cannot be opened
while it is lit.
Part No. 806630EN