Care And Maintenance; Troubleshooting Guide; Specifications - Beurer BM 67 Mode D'emploi

not be used as a basis for therapeutic treatments. The
software is not part of a diagnostic-medical system.

10. Care and Maintenance

• Clean the device and cuff with a slightly moistened
cloth.
• Do not use detergents or solvents.
• Never immerse the device in water or other liquids.
• When storing the device, make sure no heavy ob-
jects are placed on top of it. Remove the batteries.
Ensure the Air Tube does not have any sharp kinks.

11. Troubleshooting Guide

In the event of errors, the error message
on the screen.
Error messages may appear if:
• It was not possible to correctly record the pulse:
• You speak or move during the measurement:
• The cuff is fastened too tightly or loosely:
• Errors occur during the measurement:
• The pump pressure is higher than 300 mmHg:
• The batteries are almost empty:
• The data could not be sent via Bluetooth
In such cases, repeat the measurement. Do not move
or speak. If necessary, replace the batteries.
In such cases, repeat the measurement, do not move
or speak, and if necessary, replace the batteries.

12. Specifications

appears
;
;
;
;
4
;
4
;
4
22
Model BM67
Type MD3600
Measurement Oscillometric, non-invasive
Method blood pressure measurement
on the upper arm
Measurement Cuff pressure 0-300 mmHg,
Range Systolic 50-250 mmHg,
Diastolic 30-200 mmHg,
Pulse 40-180 beats/minute
Display Accuracy Systolic ± 3 mmHg,
Diastolic ± 3 mmHg,
Pulse ± 5% of the value shown
: .
®
7