Clearing Memory; Bluetooth - Beurer BM 67 Mode D'emploi

• Press the M button a third time. ' '
flashes on the display. The average val-
ue of the evening measurements for the
last seven days is displayed (evening:
6:00 PM – 8:00 PM).
Individual Measured Values:
• Press the M button again and the last in-
dividual measurement is displayed.
• To shut the device off, press the Start/
Stop button .
You can exit the menu at any time by pressing the
Start/Stop button .

Clearing Memory:

• When an individual stored measurement is dis-
played, press and hold both the + and - buttons for
five seconds. All values in the selected user mem-
ory will be deleted.
Copying Stored Measurements using

Bluetooth

1. Download and install the 'beurer HealthCoach'
app from your device's app store. Run the app and
make sure 'BM67' is selected under 'Settings/My
devices'.
2. Ensure Bluetooth
on the blood pressure monitor.
3. Access stored measurements on the unit as de-
scribed in the section 'Displaying and deleting
measurements'. Bluetooth
•
begin automatically if the two devices are paired
properly.
The 'beurer HealthCoach' app must be active to al-
low data transfer.
If your smartphone has a protective cover, remove
this to ensure that there is no interference during the
transfer.
We would explicitly draw attention to the fact that the
software to hand is not a medical product in accord-
ance with EU Directive 93/42/EEC. The values dis-
played are purely for visualisation purposes and must
21
®
is activated on your device and
®
data transfer should
®