Beurer BM 67 Mode D'emploi page 18

2. As a measurement concludes, air pressure in the
Cuff will release. The pulse symbol ( ) will dis-
play, along with systolic and diastolic pressure.
The measurement data will be stored into the se-
lected user memory.
3. ' ' and a number from 1 to 7 will appear if the
measurement was not performed properly. Refer
to the 'Troubleshooting Guide' section for details
about specific error message numbers and repeat
the measurement.
4. Press the Start/Stop button
blood pressure monitor. The device will also shut
off by itself after about one minute.
5. Wait at least five minutes before taking another
measurement.
Bluetooth
If the Bluetooth
measurement data is transferred to your paired mo-
bile device after measurement. The blood pressure
monitor will display the Bluetooth
data transfer. Press the Start/Stop button
to shut off the blood pressure monitor.
In order to transfer data to the
'beurer HealthCoach' app, you
must add the BM67 device to
to shut off the
the app under 'My devices'. The
'beurer HealthCoach' app must
be active on your nearby mobile
device to enable data transfer.
18
data transfer
®
function is activated on the unit,
®
symbol ' ' during
®
again