Cleaning And Maintenance; Accessories And Replacement Parts - Beurer BM 96 Cardio Mode D'emploi

Step 4: BM 96
Go to memory mode. Bluetooth
The "beurer HealthManager Pro" / "beurer HealthManager" app must be active to allow data trans-
fers.

9. Cleaning and maintenance

• Clean the main unit, ECG stick and cuff carefully using a slightly damp cloth only.
• Do not use any corrosive cleaning agents or solvents.
• If the electrode surfaces of the ECG stick are dirty, clean them with a damp cloth.
• When you are not using the ECG stick, disconnect it from the main unit.
• Under no circumstances should you hold the main unit, ECG stick or cuff under water, as this can cause
liquid to enter and damage the device internally.
• No heavy objects should be placed on top of the device when in storage. Remove the batteries. The
cuff line should not be bent sharply.

10. Accessories and replacement parts

Accessories and replacement parts are available from the corresponding service address (according to
the service address list). Please state the corresponding order number.
Designation
Universal cuff (22-42 cm)
USB cable
ECG Stick
® data transfer starts automatically.
Item number and/or order number
164.279
164.322
164.317
63