Saving, accessing and deleting measured values
The results of every successful measurement are stored
together with the date and time. If there are more than
30 measurements, the oldest measurements are lost.
• Press the memory button M. Select the desired user
memory (
...
) by pressing the memory button M
again.
• If you press the function button +, the average value of
all the stored measured values in the user memory will be
displayed. If you press the function button + again, the
average value of the morning measurements for the last
7 days will be displayed (morning: 5 am – 9 am, display
). If you press the function button + again, the average
value of the evening measurements for the last 7 days will
be displayed (evening: 6 pm – 8 pm, display
continue to press the function button +, the most recent
individual measured values are displayed in turn with the
date and time.
• To switch off, press the START/STOP button
• If you forget to switch off the device, it will switch itself off
automatically after 30 seconds.
• If you want to delete the whole memory for a specific
user, press the memory button M. Press and hold the
memory button M and the SET button simultaneously for
5 seconds.
8. Cleaning and maintenance
• Clean the device and cuff carefully using a slightly damp
cloth only.
• Do not use any cleaning agents or solvents.
• Under no circumstances hold the device and cuff under
water, as this can cause liquid to enter and damage the
device and cuff.
• If you store the device and cuff, do not place heavy ob-
jects on the device and cuff. Remove the batteries. The
cuff line should not be bent sharply.
9. Accessories and replacement parts
Accessories and replacement parts are available from the
corresponding service address (according to the service ad-
). If you
dress list). Please state the corresponding order number.
Designation
Universal cuff (22-42 cm)
.
Mains part (EU)
Mains part (UK)
36
Item number and/
or order number
163.911
071.95
072.05