Installing 1 Lb. Propane Cylinder - Coleman 9406 Serie Manuel D'assemblage, D'entretien Et D'utilisation

11. Insert the towing handle into the right leg (Step a in Fig. 12).
12. Press buttons in on towing handle while sliding towing
handle into right leg. Continue sliding into right leg until
buttons lock into place. (Step b in Fig. 12)
NOTE: Plastic Feet should be facing away from the grill.
a
13. Move left leg in a
clockwise direction
to slide out of leg
brackets, then back
in a counterclockwise
direction to fold legs
together.
14. Press legs firmly
downward until legs lock
into clip. (Fig. 13)
15. Rotate the leg locker clockwise into slot to secure legs.
(Fig. 14)
a
16. Once the legs are locked
in position, turn the grill
back over so the lid is
again facing up. The grill
can now easily be moved
to any location in your
campsite or backyard
by grasping the towing
handle. (Fig. 15)
Set up the Grill
1. Rotate the leg locker
counterclockwise to
release legs. (Fig. 16)
Plastic
Feet
b
2. Open up the grill from the folded position. Place one foot on
the towing handle, grasp the carry handle, and lift up and
toward you (Fig. 17). Continue to pull up until the grill stand
is fully extended. (Fig. 18)
Fig. 12 3. Lock the grill top into the leg hooks as shown. (Fig. 19)
Clips
Fig. 13
b

Installing 1 lb. Propane Cylinder

NOTE: Your 9406 Series grill is set up from the factory to use a 1
Fig. 14
lb. disposable propane cylinder.
Only cylinders marked "Propane" must be used.
This procedure MUST be performed OUTDOORS only! Read
and follow the directions on the cylinder.
Fig. 15
• NEVER store a spare L.P. gas supply cylinder under the grill
body or inside the grill enclosure or in the vicinity of any
heat producing appliance.
Failure to follow this information exactly could result in an
explosion and/or fi re causing death or serious injury.
English - 6
Fig. 17
Locked
Fig. 19
WARNING
WARNING
DANGER
Fig. 16
Fig. 18