3.3
INSTALLING THE APPLIANCE
Due to the many different materials used on different walls, it is highly recommended that you consult your
local builder before you install this appliance on the wall.
A.
Select a location that is not prone to moisture and is located at least
36" away from combustible materials such as curtain drapes, furniture,
bedding, paper, etc.
B.
Have two people hold the appliance against the wall to determine the
fi nal location.
C.
Mark out location, then mount the bracket onto the wall using the six
supplied screws. This bracket MUST have the hooks facing upward
and be level. NOTE: It is strongly recommended that the mounting
bracket be screwed into the wall studs where possible. If the
wall studs cannot be used, ensure that the
supplied plastic anchors are used to affi x
the bracket to the wall and the bracket is
adequately secured.
D.
With the wall mounting bracket installed have two
people lift the appliance up and insert the two
hooks on the bracket into the two slots on the
back of the appliance.
E.
Check the appliance for stability ensuring that the
bracket will not pull free from the wall.
REAR VIEW
SLOTS
Glass Front
Side View
Floor
Screws
Hooks
Wall Mount
Bracket
W415-1179 / 01.15.13
9
EN
Body
18"
MIN