8
3.2
INSTALLING THE APPLIANCE ON A WALL
Due to the many different fi nish materials used on walls, it is highly recommended that you
EN
consult your local builder before you install this appliance on the wall.
A.
Select a location that is not prone to moisture and is located at least 36"
(914.4mm) away from combustible materials such as curtain drapes, furniture,
bedding, paper, etc.
B.
Have two, or more people hold the appliance against the wall to determine the fi nal
location.
C.
Mark out the location for one of the two brackets. The supplied wall mount
brackets will be centered between the two sets of slots, on the back of the
appliance. These brackets have four slots and two hooks.
D.
Mount the bracket onto the wall using the four supplied screws. These
brackets MUST have the hooks facing upward and level. NOTE: It is strongly
recommended that the mounting bracket be screwed into the wall studs
where possible. If the wall studs cannot be used, ensure that the supplied
plastic anchors are used to affi x the bracket to the wall and the bracket is
adequately secured.
E.
Use a distance of 21 1/4" (540mm) and mark the location for the second bracket.
F.
Mount the bracket onto the wall using the four supplied screws. These brackets MUST have the
hooks facing upward and level. NOTE: It is strongly recommended that the mounting bracket be
screwed into the wall studs where possible. If the wall studs cannot be used, ensure that the
supplied plastic anchors are used to affi x the bracket to the wall and the bracket is adequately
secured.
G.
With the wall mounting brackets installed have two people lift the appliance up and insert the four
hooks on the brackets into the four slots on the back of the appliance.
H.
Check the appliance for stability ensuring that the brackets will not pull free from the wall, causing the
appliance to fall.
WALL MOUNT BRACKET
W415-1140 / A / 07.04.13
SLOTS
SLOTS
HOOKS
21 1/4" (540mm)
BACK VIEW
Side View
3 5/8"
(92mm)
FLOOR
SLOTS
WALL MOUNT BRACKET
SLOTS
HOOKS