Finish Cooking - Steba IK 400 S.B.EK. Mode D'emploi

the program will be deleted, as no pot is on the appliance.
Choose the (left or right) cooking area and touch at the control panel

Finish cooking

Residual heat "H" shines until the plates are cooled down.
Booster
A higher power is given to the selected plate for 5 minutes. Only one plate can use
the Booster. If two plates are turned on and the Booster should be set for one of tho-
se, then the power given to the second plate will be reduced for 5 minutes.
Slide controll
If you do not select a power level within one minute the
appliance turns off.
You can change the power setting while using the induction
cooker.
1) Touch the button of the plate (1-3) you
want to shut down.
2) Set the slide control to "0".
3) Turn off the whole cooking area with
the On/Off button.
Stop the Booster
Touch the chosen cooking area and then the
booster sign "b". The symbol "B2 is flashing.
Change the power output by moving the slide
control within 5 seconds.
Choose the cooking area 1-2-3- Slide
the slide-control to the right until
the symbol "b" is flashing. The
booster will be activated after 5
seconds. The highest power output
is activated.
15