Control Panel - Steba IK 400 S.B.EK. Mode D'emploi

Heatingzones
XXL-Zone /
Flexible heating zone

Control panel

Use
Only touch the switching point 1-7
on the control panel with your fingers.
Use cookware suitable for induction cooker,
proof it with a magnet. Do not scratch
the pot over the surface of the cooker.
Press the On/Off button "..."3 seconds.
The appliance beeps one time and the display shows "[0]--"
Pay attention that the glass surface
and the base of the pot are dry and clean.
Place the suitable pot/pan, with a minimum diameter of 14 cm,
on the left or right marking "+".
If you place the pot eccentric up to more than a half, "..." flashes on
the display and the appliance turns off after 2 minutes.
Choose the plate (left or right) on the control panel.
Set the power on the slide control. When „LO" is flashing in the dis-
play, then the child lock is activated. Touch the sensor area (Nr. 6) for
5 seconds and in the display "- -" is visible. When "U" is flashing then
14
Left heating zone
Touch Controll:
1) Left heating zone
2) Right heating zone
3) XXL-Zone / FLEXIBLE heating zone
4) Timer
5) On / Off
6) child lock
7) Slidecontroll Power / Timer
Right heating zone two independent
Heatingzones