Overheat Protection - Steba IK 400 S.B.EK. Mode D'emploi

Setting the timer for several plates
Choose the plates (1+2) and set the power for each.
Individually set the time for the left and right plate as described above.
The display shows the shorter time and the red light next to the plate flashes. If you
want to display the other time, shortly press the control panel of the other plate.
Stop timer
Touch the plate (1-3).
Touch the timer (4), the display flashes. Push the slide control to the left and press
timer (4) again. The display shows "0". With that the timer is stopped. If the plate is
turned off, the timer is turned off, too automatically.
Child lock
Touch the button (6). The display shows "Lo".
To unlock the appliance touch the button (6) again (at least 3 seconds). "Lo" goes out.

Overheat protection

This supervises the appliances interior temperature. The appliance turns off if the
temperature is too high. Leave it to cool and make sure that the ventilation slits are
not blocked up by dirt. If necessary clean. Restart the appliance.
Advice
fat and oil heats very fast, especially when the boost
function is used.
Danger of fire!
∙ Reduce the power if the food starts to boil.
Environment
∙ Use a lid to reduce cooking time
∙ Avoid unnecessary liquid
∙ Start with a high power level and reduce then
∙ Simmering starts with around 85°C if some bubbles rise in the liquid.
∙ Do not use meat directly out of the refrigerator.
∙ The harder the meat feels by touching during cooking, the more "well done" it is.
17