XXL cooking area (for wide pots)
The pot bottom must cover the cooking areas 1-2-3 by at least 50%. Touch the cook
area button (Nr. 3) and adjust the power with the slide control.
Timer – Memory
Use timer with switch off
16
Use timer without switch off (count down)
Important: You do not have to choose a plate. The appliance
needs to be turned on.
Touch the timer (4), the display shows "10" and "0" is flashing.
Set the time by touching the slide control (e.g. 5)
Touch the timer again, the "1" flashes.
Set the time with the slide control (e.g. 9). The timer is set on 95
minutes.
The timer starts to count down. The display shows the remaining
time.
If the time ran out, the appliance beeps for 30 seconds, the dis-
play shows "- -"
Touch the plate (1, 2 or 3).
Touch the timer (4), the display shows "10" and "0" is flashing.
Set the time by touching the slide control (e.g. 5)
Touch the timer again, the "1" flashes.
Set the time with the slide control (e.g. 9). The timer is set on 95
minutes.
The timer starts to count down. The display shows the remaining
time.
A red dot next to the power display shows which plate is timed.
After the time ran out, the selected plate shuts down.
"Attention" If the other plate was turned on before, too, it still
keeps on working.