GYS BATIUM 25/24 Manuel D'utilisation page 12

Translation of the original instructions
CONNECTIONS AND GENERAL OPERATIONS
Ensure that the correct sequences are followed.
Precaution: Check the electrolyte level for open batteries. Fill it up if necessary, before starting the charge.
1. Connect the clamps : Red clamp to the battery's (+) and black clamp to the battery's (-).
Specific to the IUIo mode
Connect the charger :
- directly to the battery, using the charger's standard clamps.
- or the device's specific connector, by replacing the clamps with a dedicated connector while observing
the correct polarity and current .
2. Connect the charger to the 230 V mains.
3. Turn the switch to «ON». The display's leds rotate.
4. Choose the charging curve ( button 5 p.44):
IUoU
- IUoU for automotive batteries,
IUIo
- IUIo for traction batteries. To choose the IUIo mode, press 5 seconds.
5. Select the battery voltage (6, 12, 24 V) according to the recommendations features on the battery or
according to the battery coupling (series or parallel, see p.44).
Risk of explosion or acid projections if the wrong voltage is selec-
ted (24V for a 12V battery).
6. Choose the charging speed depending on the battery capacity (Ah) ( 3 p.44).
IUoU
7. Before starting the charge, the Batium performs
the following operations :
a- battery analysis : battery state/voltage... The
Batium signals an anomaly (see table p13).
b- It recovers the battery when the voltage is too
low.
8. The Batium starts the charge and indicates the battery state of charge as well as the charging current
in amperes ( p.44)
1
«SOS Recovery»
mode
IUoU & IUIo
mode
Equalisation (duration : 2h).
Charge is finished
12
7 A max 15 A max
35 95
95 Ah 225 Ah
Step 1 :
Analysis, start of the
desulfation and
recovery, battery
voltage
Main charge.
Step 2 :
Step 3 :
BATIUM 25/24
25 A max
200
IUIo
350 Ah
While the leds rotate
possible to change the settings.
The message
play. The settings cannot be modified.
The message
as the Batium recovers the battery.
Indicator
on
Depending on the battery, the current can rise or fall.
Floating charge.
7 A max 15 A max
90
45
8h
90 Ah 150 Ah
14h
4
( p.44), it is still
(check ) appears on the dis-
remains in the display, as long
Display
Electrical current display.
Charging current.
End of charge
(IUIo).
EN
25 A max
120
180 Ah
The battery
cannot be
recovered.