GYS BATIUM 25/24 Manuel D'utilisation page 11

Translation of the original instructions
Maintenance:
• If the power supply cable is damaged, it must only
be replaced by a cable specified or supplied by the
manufacturer or its after-sales service.
• Service should be performed by a qualified person.
• Warning! Always remove the power plug from the wall
socket before carrying out any work on the device.
• If the internal fuse is blown, it must be replaced by the
manufacturer, its after-sales service or an equally qualified
person.
• Regularly take off the cover and remove dust with an air
gun. Take the opportunity to have a qualified person check
the electrical connections with an insulated tool.
• Under no circumstances should solvents or other aggressive
cleaning agents be used.
• Clean the device's surfaces with a soft, dry cloth.
Regulations
• The device complies with European Directive.
• The certificate of compliance is available on our website.
• EAC conformity mark (Eurasian Economic Commission)
Disposal:
• This product should be disposed of at an appropriate
recycling facility. Do not dispose of in domestic waste.
GENERAL DESCRIPTION
The 25/24 was designed for two purposes :
The IUoU charging curve can charge liquid or gel electrolyte batteries (lead, lead Calcium, lead Calcium-silver, AGM...)
from 35 Ah to 350 Ah in 6, 12 or 24 V.
The IUIo charging curve can charge traction batteries (e.g. for forklifts, floor sweepers...), from 35 Ah to 180 Ah in 6,
12 or 24 V.
BATIUM 25/24
EN
11