Grizzly EM 1130 Traduction De La Notice D'utilisation Originale page 48

GB
not use your equipment for
purposes other than those for
which it is designed.
• Do not use the equipment near
inflammable liquids or gases.
Non-observance will result in a
risk of fire or explosion.
• Do not lift or carry the equip-
ment when the motor is running.
• Switch off the equipment and
disconnect the plug:
- Whenever you leave the ma-
chine,
- Before cleaning the ejection
hole or removing blockages,
- When the equipment is out of
use,
- Before checking, cleaning or
working on the equipment,
- If the power cable is damaged
or frayed,
- If the equipment has hit a
foreign object or if strange
vibrations occur during work.
In this case, check the equip-
ment for damage and have it
repaired if applicable.
- ensure that all nuts, bolts and
screws are tight.
- check the mower for possible
damage.
- repair damaged parts if nec-
essary.
• Do not place feet or hands near
or under rotating parts. Do not
stand in front of the grass ejec-
tion hole during sickle mowing.
Maintenance and Storage:
• When servicing the blades,
ensure that the blades can
be moved, even if the power
source is switched off.
• Ensure that all nuts, bolts and
48
screws are tightened firmly and
the equipment is in safe working
condition.
• Do not attempt to repair the
equipment yourself unless you
have been trained to do so.
Any work not specified in these
instructions is to be carried out
only by customer service cen-
tres that we have authorised.
• Keep the equipment in a dry
location and out of reach of chil-
dren.
• Handle the equipment with care.
Keep tools sharp and clean,
in order to facilitate better and
safer work. Follow the mainte-
nance instructions.
• Wear protective gloves when
changing the cutting device.
• Regularly check the grass col-
lection device for wear and
strains. For safety reasons,
replace worn or damaged parts.
When adjusting the blades, take
particular care to avoid fingers
being trapped between the ro-
tating blades and fixed parts of
the machine.
• Check that only replacement
tools authorised by the manu-
facturer are used.
Electrical Safety:
• Ensure that the mains voltage
matches the specifications on
the rating plate.
• Connect the equipment only to
a socked with a residual current-
operated protective device
(RCD)
• Avoid bodily contact with
earthed parts (e.g. metal fences,
metal posts).