Installation Of Devices 8013/3.2 Into The Panel - Stahl PanSic 8013/3 Série Mode D'emploi

5.2

Installation of Devices 8013/3.2 into the Panel

▶
Push the actuator from the front through the panel opening, making sure the seal is
seated flat against the panel, and lock it in position.
▶
Align the contact block with the three tabs of the actuator and snap them together.
▶
Tighten the union nut against the panel.
Spring clamp terminals
• Power 2 x 18 to 2 x 12 AWG.
Conductor connection to spring clamp terminals
▶
Cut-away with spring clamp terminals with capacity of 2 x 18 to 2 x 12 AWG (1).
▶
Open the spring clamp terminal with a screwdriver (blade – 0.6 x 3.5 mm/0.02 x 0.14 inch)
by inserting it into the square cut-out and hold the clamp open (2).
▶
Insert the conductor into one of the rounded openings (3).
▶
Remove the screw driver (4).
When installing devices without terminal cap, 8013/3.1 (see chapter 5.3).
290430 / 8013608300
2021-06-25·IO00·III·en·00
Mounting and Installation
LED indicator lamps
for panel mounting
Series 8013/3
DE
US
FR
IT
ES
RU
NL
DK
SE
FI
PT
11611T00
GR
PL
CZ
SK
HU
SL
RO
11614T00
BG
LV
LT
EE
CH
KR
CN
9