3
Safety
This device has been manufactured according to the state of the art of technology.
Recognized safety-related rules and standards were observed in this process.
The device must nevertheless be operated properly and carefully at all times.
Incorrect operation can put the user and other persons in danger. Damage to the device,
environment and material assets is also possible
▶
Use the device only
- if it is not damaged
- for the purpose for which it is defined
(see Section "Intended use")
- in accordance with these operating instructions.
The nature of these instructions is only informative and does not cover all of the details,
variations or combinations in which this equipment may be used, its storage, delivery,
installation, safe operation and maintenance.
Since conditions of use of the product are outside of the care, custody and control of
the manufacturer, the purchaser should determine the suitability of the product for his
intended use, and assumes all risk and liability whatsoever in connection therewith.
3.1
Intended Use
The indicator lamps signal command modes in load, control and signal circuits by means of
a light signal by lighting up or going out.
The LED indicator lamps are approved for use in hazardous areas of Class I, Div. 2 and
Class I, Zone 1.
The devices are available in 3 versions:
• Type 8013/3.1: with connection chamber
• Type 8013/3.2: without connection chamber
• Type 8013/3.3: with connection chamber and integrated electrical line
Types 8013/3.. are completely certified explosion-protected equipment.
They are suitable for mounting in enclosure walls, electric device covers, panels or control
cabinets (type of protection "Increased Safety e" acc. to UL 60079-7).
The 8013/32 types are produced in an intrinsically safe version and are operated with
intrinsically safe circuits.
290430 / 8013608300
2021-06-25·IO00·III·en·00
LED indicator lamps
for panel mounting
Series 8013/3
Safety
DE
US
FR
IT
ES
RU
NL
DK
SE
FI
PT
GR
PL
CZ
SK
HU
SL
RO
BG
LV
LT
EE
CH
KR
CN
5