Transport And Storage - Stahl PanSic 8013/3 Série Mode D'emploi

Masquer les pouces Voir aussi pour PanSic 8013/3 Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Damaged seal (impairment of IP protection)
The IP degree of protection identifies how equipment must be sealed according to
regulations.
Making structural modifications, for example drilled holes, or improper mounting can impair
the device's IP protection. This may result in explosions causing serious or fatal injuries to
persons.
Only make modifications to the device in accordance with the directions in these operating
instructions. Have R. STAHL or a certified test body (third-party inspection)
carry out acceptance testing on any modifications made.
Perform maintenance and repairs on the device only using original spare parts.
Consult R. STAHL beforehand.
Improper installation, commissioning and maintenance
The work listed above may only be performed in accordance with the current national
regulations of the country of use. Otherwise, the explosion protection may be rendered
ineffective. This may result in explosions causing serious or fatal injuries to persons.
To prevent this, comply with the following safety measures:
Have mounting, installation, commissioning and maintenance performed only by qualified
and authorised persons (see Chapter 3.2).
Only make modifications to the device in accordance with the directions in these operating
instructions. Have R. STAHL or a certified test body (third-party inspection)
carry out acceptance testing on any modifications made.
Perform maintenance and repairs on the device only using original spare parts.
Consult R. STAHL beforehand.
3.3.2 Risk of Injury
Electric shock
During operation, high voltages may sometimes be present at the device.
Contact with live components can cause severe electric shock and injury to persons.
Operate the device only on equipment with the internal voltage specified in the
"Technical data" chapter.
Only connect electrical circuits to suitable terminals.
Disconnect the power supply before installing or servicing these devices.
4

Transport and Storage

Transport and store the device carefully and in accordance with the safety notes
(see "Safety" chapter).
290430 / 8013608300
2021-06-25·IO00·III·en·00
Transport and Storage
LED indicator lamps
for panel mounting
Series 8013/3
DE
US
FR
IT
ES
RU
NL
DK
SE
FI
PT
GR
PL
CZ
SK
HU
SL
RO
BG
LV
LT
EE
CH
KR
CN
7

Publicité

Chapitres

Table des Matières
loading

Table des Matières