Repair; Returning The Device; Cleaning; Disposal - Stahl PanSic 8013/3 Série Mode D'emploi

7.3

Repair

▶
Repair work on the device must be performed only by R. STAHL.
▶
Any damaged parts of the device or a damaged device must be replaced promptly to
ensure the electrical safety and explosion protection of the system.
8

Returning the Device

▶
Only return or package the devices after consulting R. STAHL!
Contact the responsible representative from R. STAHL.
R. STAHL's customer service is available to handle returns if repair or service is required.
▶
Contact customer service personally.
or
▶
Go to the r-stahl.com website.
▶
Under "Support" > "RMA" > select "RMA-REQUEST".
▶
Fill out the form and send it.
You will automatically receive an RMA form via email. Please print this file off.
▶
Send the device along with the RMA form in the packaging to
R. STAHL Schaltgeräte GmbH (refer to chapter 1.1 for the address).
9

Cleaning

▶
Check the device for damage before and after cleaning it. Decommission damaged
devices immediately.
▶
Clean the device with a damp cloth only.
▶
When cleaning with a damp cloth, use water or mild, non-abrasive, non-scratching
cleaning agents.
▶
Do not use abrasive cleaning agents or solvents.
▶
Never clean the device with a strong water jet, for example a pressure washer!
10

Disposal

▶
Observe national, local and statutory regulations regarding disposal
▶
Separate materials for recycling.
▶
Ensure environmentally friendly disposal of all components according to statutory
regulations.
290430 / 8013608300
2021-06-25·IO00·III·en·00
Returning the Device
LED indicator lamps
for panel mounting
Series 8013/3
DE
US
FR
IT
ES
RU
NL
DK
SE
FI
PT
GR
PL
CZ
SK
HU
SL
RO
BG
LV
LT
EE
CH
KR
CN
13