Risk Of Injury; Transport And Storage - Stahl PanSiC 8018/3 Série Mode D'emploi

Improper installation, commissioning and maintenance
The work listed above may only be performed in accordance with the current national
regulations of the country of use. Otherwise, the explosion protection may be rendered
ineffective. This may result in explosions causing serious or fatal injuries to persons.
To prevent this, comply with the following safety measures:
▶
Have mounting, installation, commissioning and maintenance performed only by qualified
and authorised persons (see Chapter 3.2).
▶
Only make modifications to the device in accordance with the directions in these operating
instructions. Have R. STAHL or a certified test body (third-party inspection)
carry out acceptance testing on any modifications made.
▶
Perform maintenance and repairs on the device only using original spare parts.
Consult R. STAHL beforehand.

3.3.2 Risk of Injury

Electric shock
During operation, high voltages may sometimes be present at the device.
Contact with live components can cause severe electric shock and injury to persons.
▶
Operate the device only on equipment with the internal voltage specified in the
"Technical data" chapter.
▶
Only connect electrical circuits to suitable terminals.
▶
Disconnect the power supply before installing or servicing these devices.
4

Transport and Storage

▶
Transport and store the device carefully and in accordance with the safety notes
(see "Safety" chapter).
290432 / 8018607300
2021-06-11·IO00·III·en·00
Transport and Storage
LED illuminated pushbutton
for panel mounting
Series 8018/3
DE
US
FR
IT
ES
RU
NL
DK
SE
FI
PT
GR
PL
CZ
SK
HU
SL
RO
BG
LV
LT
EE
CH
KR
CN
7