Grizzly EV 1200-31 ZV Traduction De La Notice D'utilisation Originale page 49

• Ensure that all nuts, bolts and screws
are firmly tightened and that the im-
plement is in a safe working state.
• Never try to repair the implement
yourself, other than you have been
trained accordingly. All work that has
not been listed in these Instructions
must only be carried out by authorised
servicing agencies.
• Treat the implement with the great-
est care. Always keep the tool clean
for better and safer work. Follow the
maintenance instructions.
• Never overload the implement. Always
work within the specified capacity range.
Do not use low-power machines for
heavy-duty work. Do not operate the im-
plement for purposes for which it is not
intended.
Electrical safety:
CAUTION! The following states how
to avoid accidents and injuries due
to electric shock:
• Before each use, carry out a visual
inspection of the power and extension
cables for signs of damage or ageing.
• If the power cable for this equipment is
damaged, it must be replaced by the
manufacturer, a customer service agent
of the same or a similarly qualified per-
son in order to prevent hazards.
• Keep the power cable well away from
the cutting tools. Should the power
cable become damaged during work,
then instantly disconnect the power
cable from the mains.
DO NOT touch the power cable be-
fore it has been disconnected from
the mains.
• Keep the extension cables away from
the teeth. The teeth may damage the
cables and result in contact with live
parts.
• Check that the mains voltage is the
same as indicated on the rating plate.
• Connect the implement to a power
socket with a residual-current circuit
breaker that has a rated current of not
more than 30 mA.
• Avoid body contact with earthed parts
(e.g. metal fences, metal posts).
• Only use approved extension cables
of the type H05RN-F or H05VV-F with
a maximum length of 75 m and which
have been approved for open-air use.
The stranded cord diameter of the
extension cable must be at least 2.5
mm . Always unreel a cable drum to
2
its full length so that the entire cable
can be checked for damage.
• Use the envisaged cable suspension
when attaching an extension cable.
• Never pull the cable to disconnect the
plug from the socket. Protect the ca-
ble from heat, oil and sharp edges.
• If the connecting cable is damaged,
first disconnect the extension cable
from the socket. You can then dis-
connect the connecting cable of the
equipment.
• If the power cable for this equipment is
damaged, it must be replaced by the
manufacturer, a customer service agent
of the same or a similarly qualified per-
son in order to prevent hazards.
GB
49