Exchanging The Cylinder; Cleaning And Maintenance; Cleaning And General Maintenance Work - Grizzly BRV 400 S Traduction De La Notice D'utilisation Originale

GB
• Guide the implement at a walking
pace down lanes that are as straight
as possible. To ensure uninterrupted
aerating or verticuting the individual
lanes should always overlap by a few
centimetres. Dwelling too long at the
same place while the implement is
running can damage the grass sward.
• Adjust the transport position setting
(see "Setting the Working Position")
when transporting the implement.
• Lift the implement to transport it over
steps and sensitive surfaces (e.g.
tiles).
• Always clean the implement after
each use (see "Cleaning, Mainte-
nance, Storage").
• After having treated lawns with dense
moss growth, it is advisable to reseed
the lawn so that it can regenerate its-
elf quicker.

Exchanging the cylinder

Switch off the engine, take out the
spark plug connector and ensure
that all moving parts are still:
Wear gloves when handling the
cylinder.
1. Turn the implement over.
2. Loosen the fixing screws (22)
with a 5mm Allen key.
3. Hold the roller (19) firmly with
one hand and pull the bracket
(23) to the right.
4. Tilt the cylinder (19) upwards
and pull the shaft (21) out of its
seat.
Insert the new cylinder by rever-
sing the sequence.
74
Cleaning and Mainte-
nance
Have any repair and mainte-
nance work not described in
these instructions carried out by
a specialist workshop. Use only
original Grizzly replacement
parts. Risk of accidents!
Carry out maintenance and clean-
ing work strictly with the engine
switched off and spark plug con-
nectors removed. Risk of injury!
Allow the equipment to cool
before any maintenance and
cleaning work. Elements of the
engine are hot. Risk of burning!
Wear gloves when handling the
blade.
Cleaning and General Mainte-
nance Work
Do not tilt the equipment sideways
or forwards. Operating fluids could
leak out and the engine could be
damaged.
• When work has finished remove plant
residues adhering to the wheels, in-
side the ventilation opening, the grass
ejector opening and the cylinder. Doe
not use hard or pointed objects for this
purpose as they could damage the
implement.
• To ensure that the collision guard flap
closes properly, remove any earth that
may have collected on the collision
guard springs and/or the housing.
• Completely empty the collection bag.