Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
•
When work has finished remove plant
residues adhering to the wheels, in-
side the ventilation opening, the grass
ejector opening and the cylinder. Do
not use hard or pointed objects for this
purpose as they could damage the im-
plement.
•
Completely empty the collection bag.
•
Always keep the implement clean. Do
not use cleaning agents or solvents.
We cannot be held liable for damage
caused by our implements if they were
improperly repaired, if non-original parts
have been used or if they were used not in
keeping with their intended purpose.
Exchanging the cylinder
Switch off the implement, discon-
nect the mains plug and wait until
the cylinder is standing still.
Wear gloves when handling the
cylinder.
1. Turn the implement over.
E
2. Loosen the wing screw (19)
and pull the bearing support up-
wards.
3. Tilt the cylinder (
wards and pull the shaft out of
the
square receptacle
4. Insert the new cylinder (
by reversing the sequence.
A
16/17) up-
(20).
A
16/17)
Storage
•
Store the implement in a dry place well
out of reach of children.
•
Allow the motor to cool down before
placing the implement in a closed
room.
•
Do not wrap nylon sacks around the
implement as this could result in the
formation of moisture.
To save space when stored, the
handlebar can be folded down af-
ter releasing the tightening levers.
Ensure that the cables are not
squeezed.
Disposal and protection
of the environment
Dispose of the implement, accessories
and packaging in an environment-friendly
manner.
Electrically-powered appliances
must not be disposed of with the
domestic waste.
Hand in the spent implement to a recycling
centre. The plastic and metal parts can
then be sorted out and graded for recy-
cling. Our Service Center will be happy to
answer any questions in this respect.
GB
31
Publicité
Chapitres
Table des Matières
