Probleme Lösen - IKEA TREVLIG Mode D'emploi

Masquer les pouces Voir aussi pour TREVLIG:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

DEUTSCH
Probleme lösen
• Sicherstellen, dass der Strom nicht ausgefallen ist.
• Lässt sich das Kochfeld nach dem Gebrauch nicht ausschalten,
muss es von der Stromversorgung getrennt werden.
• Erscheinen am Display nach dem Einschalten des Kochfelds
alphanumerische Codes, prüfen Sie diese und die
entsprechenden Anweisungen in der unten aufgeführten Tabelle.
Displaycode
Beschreibung
Kein Code
Sie können das Kochfeld
nicht einschalten oder
TROUBLESHOOTING
verwenden.
Kein Code
Das Display reagiert nicht
Check that the electricity supply has not been shut off.
auf Berührungen.
If you are unable to turn the hob off after using it, disconnect it from the
power supply.
If alphanumeric codes appear on the display when the hob is switched on,
F0E1
Das Topfgeschirr wird
consult the following table for instructions.
erkannt, ist aber nicht mit
dem angeforderten Betrieb
DISPLAY CODE
kompatibel.
Cookware is detected but it is not
compatible with requested operation.
F0E1
F0E7
Falscher Anschluss des
Netzkabels
Wrong power cord connection.
F0E7
F0EA
Das Bedienfeld schaltet
wegen Überhitzung ab.
The control panel switches off because
F0EA
of excessively high temperatures.
F0E2, F0E4, F0E6,
Trennen Sie den Herd von der Stromversorgung.
F0E2, F0E4, F0E6,
Disconnect the hob from the power supply.
F0E8, F0EC, F1E1,
Einige Minuten warten, anschließend das Kochfeld erneut an die Stromversorgung anschließen.
F0E8, F0EC, F1E1,
Wait a few seconds then reconnect the hob to the power supply.
F6E1, F7E5, F7E6 ,
Sollte das Problem weiterhin bestehen, das Servicezentrum kontaktieren und den Fehlercode angeben, der auf dem
F6E1, F7E5, F7E6
If the problem persists, call the service centre and specify the error code that appears on the display.
Display erscheint.
F2E1
d E
The hob does not switch heat up.
Das Kochfeld lässt
Beispiel:
The functions do not come on.
[when the hob is off]
keine Aktivierung einer
The hob does not allow a special
Sonderfunktion zu.
function to be activated.
e.g.
:
Das Kochfeld stellt
Beispiel:
The hob automatically sets a minimum
e.g.
automatisch eine
power level to ensure that the cooking
[Leistungsstufe
[Power level lower than
zone can be used.
Mindestleistungsstufe ein,
niedriger als die
level requested]
um sicherzustellen, dass die
geforderte Stufe]
Kochzone verwendet werden
kann.
SOUNDS PRODUCED DURING OPERATION
Induction hobs may whistle or creak during normal operation.
These noises actually come from the cookware and are linked to the
characteristics of the pan bottoms (for example, when the bottoms are
made from different layers of material or are irregular).
AFTER-SALES SERVICE
In order to receive a more complete assistance, please register your
product on www . indesit . com / register.
BEFORE CALLING THE AFTER-SALES SERVICE:
1.
See if you can solve the problem by yourself with the help of the
suggestions given in the TROUBLESHOOTING.
2.
Switch the appliance off and back on again to see if the fault persists.
IF AFTER THE ABOVE CHECKS THE FAULT STILL OCCURS, GET IN
TOUCH WITH THE NEAREST AFTER-SALES SERVICE.
To receive assistance, call the number shown on the warranty booklet or
follow the instructions on the website www . indesit . com .
When contacting our Client After sales service, always specify:
a brief description of the fault;
the type and exact model of the appliance;
Type: XXX
Mod.: XXX
XXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXX
Made in X
XXXXXXXXXXXXXXXXXXXXXX
Mögliche Ursachen
Auf dem Bedienfeld sind
Wasserrückstände oder Flecken.
Das Display ist teilweise Bedeckt
oder die Töpfe sind zu nahe am
Display positioniert.
Das Kochgeschirr ist nicht gut auf
der Kochzone positioniert oder
nicht kompatibel mit einer oder
DESCRIPTION
mehreren Kochzonen.
Der Netzanschluss entspricht nicht
genau den Angaben im Absatz
„ANSCHLUSS AN DAS STROMNETZ".
Die interne Temperatur der
elektronischen Komponenten ist
zu hoch.
Der Leistungsregler begrenzt die
Leistungsstufen entsprechend
dem für das Kochfeld eingestellten
Maximalwert.
Der Leistungsregler begrenzt die
Leistungsstufen entsprechend
dem für das Kochfeld eingestellten
Maximalwert.
01
XXXX XXX XXXXX
XX XXXX XXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Hinweis: Wasser, aus Kochgeschirr verspritzte Flüssigkeit oder
Gegenstände irgendwelcher Art können die versehentliche
Aktivierung oder Deaktivierung der Bedienfeldsperre
verursachen.
Please note: The presence of water, liquid spilled from pots or any
objects resting on any of the hob buttons can accidentally activate or
deactivate the control panel lock function.
POSSIBLE CAUSES
The cookware is not well positioned on
the cooking zone, or it is not compatible
with one or more cooking zones.
The power supply connection is not
exactly as indicated in "ELECTRICAL
CONNECTION" paragraph.
The internal temperature of electronic
parts is too high.
DEMO MODE on.
The power regulator limits the power
levels in accordance with the maximum
value set for the hob.
The power regulator limits the power
levels in accordance with the maximum
value set for the hob.
These noises may vary according to the type of cookware used and to
the amount of food it contains and are not the symptom of something
wrong.
the service number (number after the word Service on the rating
plate). The service number is also indicated on the guarantee
booklet;
your full address;
your telephone number.
If any repairs are required, please contact an authorized after-sales
service (to guarantee that original spare parts will be used and repairs
carried out correctly).
In the case of flush-mounted installation, call the After Sales Service to
request assembly of screws kit 4801 211 00112.
Abhilfemaßnahme
Reinigen und trocknen Sie das Bedienfeld ab.
Entfernen Sie die Gegenstände. Entfernen
Sie die Töpfe vom Display. Sollte die Störung
weiterhin bestehen, warten Sie 10 Sekunden.
Drücken Sie zweimal die Ein-/Ausschalttaste,
um den F0E1-Code zu löschen und den Betrieb
der Kochzone wiederherzustellen. Versuchen
SOLUTION
Sie anschließend, das Kochgeschirr auf einer
Press On/Off button twice to remove the
anderen Kochzone zu verwenden, oder
F0E1 code and restore the functionality
verwenden Sie anderes Kochgeschirr.
of the cooking zone. Then, try to use the
cookware with a different cooking zone, or
Verwenden Sie einen Netzanschluss, der den
use different cookware.
Angaben im Absatz „ANSCHLUSS AN DAS
STROMNETZ" entspricht.
Adjust the power supply connection
according to "ELECTRICAL CONNECTION"
Warten Sie vor dem Gebrauch ab, bis sich das
paragraph.
Kochfeld abgekühlt hat.
Wait for the hob to cool down before using
it again.
Follow the instructions in the "DEMO
Siehe Absatz „Leistungsmanagement".
MODE" paragraph.
See paragraph "Power management".
Siehe Absatz „Leistungsmanagement".
See paragraph "Power management".
21
EN

Publicité

Table des Matières
loading

Table des Matières