Installation of the panel
The panel is the part which protects
the mechanisms in the lower part of
the freestanding fireplace [photo 3].
The flap fits onto the stop screw
[pic. 4-b] and pivots on the screw [c].
Adjust the screw [pic. 5] on the right-
hand side of the flap (holding the
magnet) so that:
- the magnet has sufficient force of
attraction,
- and that the flap is vertical in a
closed position.
The magnet attracts the filings : keep
the contact parts clean !
Refitting the door
Refit the door on its hinges.
A spring inside the door shuts it
automatically [picture 1] hook up the
spring to its lug inside the freestanding
fireplace [picture 2].
3
5
1
21
4
b
2
c