Stuv 16-cube & H Mode D'emploi page 22

Graduated tablet
Tilt the flap [picture 1].
Slide in the graduated tablet – adjusted
to the centre of the register − under
the register hood [picture 2]. It is
simply placed on the 2 lateral screws.
Put the back edge of the tablet under
the valve cover [photo + diagram
3-a].
The front edge of the tablet is inserted
between the front part of the flap
[3-b] and the 2 lateral screws [3-c].
Close the flap [picture 4].
When the installation of the freestanding fireplace is complete...
... Carry out a test to ensure it is
working correctly.
Before this test, ensure no items
involved in installation have been left
in the combustion chamber or in the
bends (spray paint, tubes of grease,
tools).
When the fire is first lit, some smoke
or odours may be produced : Ventilate
the room thoroughly.
1
3
b
4
See directions for use.
Once installation is complete, return
the directions for use to the user. Fill
in the guarantee certificate with him
(at the back of the directions for use)
and advise him to return it to the
manufacturer or importer.
22
2
c
a
a
b
c