Stuv 16-cube & H Mode D'emploi page 20

Positioning of the freestanding fireplace
Place the freestanding fireplace onto
the plate.
The freestanding fireplace's lug [photo
1-a] must be lowered onto the hole
[b] cut in the plate.
Fasten the freestanding fireplace
to the plate using screws and nuts
[photos 2, 3 and 4].
Put on the cover [photo 5]. The hole
cut in the cover should be centred in
relation to the freestanding fireplace's
smoke outlet.
Attach the cover using the 4 screws at
the front [photo 6], starting with the
lower screws.
The upper part of the cover has to
be fixed to the freestanding fireplace
using a bolt provided for this purpose
[photos 7 and 8].
Undo the bolt's hexagonal screw
[photo 7]
Swivel it 3/4 of a turn [photo 8] and
retighten.
1
a
b
3
5
7
20
2
4
6
8