On Taking Delivery Of The Equipment - Stuv 16-cube & H Mode D'emploi

INSTALLATION

On taking delivery of the equipment

Please note !
Upon receipt of this freestanding
fireplace, please ensure than the
glass door has not been damaged
during delivery. The guarantee only
covers damage due to transport if it is
reported within 48 hours of delivery
and it is indicated on the delivery slip
[picture 1].
Complaints
Always indicate the serial number
visible on the freestanding fireplace
when making a complaint [picture 2].
Unpacking
Please note !
The paint is not oven baked and is
therefore relatively fragile but will
harden after being heated a few
times. Handle the system with care
when installing.
Checking the order
Where accessories have been ordered
(frame, support,...), they will be
found around the hearth or its
packaging. Please check all accessories
are supplied as ordered.
Inside the combustion chamber, you
will find...
[a] Paint spray for touch-up
[b] grips to handle the finishing cover
[c] flap
[d] graduated tablet
[e] cold handgrip to handle the door
and the valve
[f] anti-sweep stainless steel bar
[g] 2 bolts for attaching the front of
the freestanding fireplace to the
support plate
1
3
b
e
f
[h] 2 screws for attaching the back of
the freestanding fireplace to the
support plate
[i] adjustable levelling feet
[j] Installation instructions and
directions for use
16
2
a
g
h
i
d
c
j