Helvi Maxitech 360C Manuel D'instructions page 12

Centralized Connection for the connection of
A
the welding torch on MIG/MAG welding.
Positive Current Socket (+)
B
• for the connection of the earth cable on TIG
welding
• for the connection of the welding cable or
earth cable according to the type of electrode
in MMA welding
12 pin Connection (optional)
C
Water Cooling Connection for MIG Torch
D
• Blue for the water feed hose connection
• Red for the water return hose connection
E Negative Current Socket (-)
• for the connection of the earth cable on MIG/
MAG welding
• for the connection of the torch on TIG welding
F Gas Connection of the torch for TIG welding
G Trigger Connection of the torch for TIG
welding
Connection of gas feed hose
H
Main switch for generator power ON and OFF
I
10 pin Connection for the interconnecting
J
hosepack
K Power Cable
Positive Current Socket (+) for the connection
L
of the interconnecting hosepack
M
Voltage Selection Switch
N Main switch for water cooler power ON and
OFF
O
Protection Fuse
P
Connection for the Pressure Switch Cable
Water Cooling Connection for Hosepack
Q
• Blue for the water feed hose connection
• Red for the water return hose connection
R Power Cable of the water cooler
Power ON Status LED
S
Drain Valve
T
Compartment for Water Cooling Power and
U
Pressostat Cables Connection
Locking Key (optional)
V
EN-6