Special Instructions; Scope Of Supply - Etherma SOLAMAGIC S1 Instructions De Montage Et D'utilisation

Special instructions

External Dim Box WSI
• The External Dim Box WSI is an expansion component for Solamagic radiant
heaters.
• Radiant heaters of up to 3000W can be connected.
Connection module S1/S3 WSI
• The connection module S1/S3 WSI is an add-on component for the basic radi-
ant heater S1/S3 as a module of the complete system, Solamagic S1/S3.
• Radiant heaters of up to 2500 W can be connected.
• A special version with lead through 1-10 V interface is available
1-10V interface
• The WSI dimming unit is equipped with a 1-10 V interface. In special cases, a
radiant heater can be controlled with a 1-10 V control unit via the connection
module (type number IR 05070) instead of the Solamagic wireless remote con-
trol. In this way radiant heaters of up to 3000 W output can be switched and set
to three levels (33 %, 66 %, 100 %).
• 1-10V interface operation can only be configured by specially trained qualified
personnel.
• Only control components that fulfil the special requirements of heaters accor-
ding to DIN-EN 60335 and 61000-4 can be connected to the 1-10 V interface.

Scope of supply

External Dim Box WSI
• Installation and Instruction Manual
• External Dim Box
• Wall bracket
• Fastenings:
 2 off Allen screws M4x10,
 1 off Allen key 3 mm
Connection module S1/S3 WSI
• Installation and Instruction Manual
• Connection module S1 WSI
• Fastenings:
 2 off Allen screws M4x10,
 2 off serrated lock washer 4.3 mm,
 1 off Allen key 3 mm
16