Features And Controls - Briggs & Stratton ELITE 2500 MAX PSI Manuel D'utilisation

Features and Controls

Read this Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
H
J
A - Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger
lock.
B- Accessory Tray — Provides convenient storage for
standard accessories.
C - Recoil Starter — Used for starting the engine manually.
D - Fuel Tank — Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
E - Warning/Operating Instructions Tag — Identifies
hazards and proper procedure to start/stop pressure
washer.
F - Throttle Lever — Sets engine in starting mode for recoil
starter and stops a running engine.
G - Air Filter — Protects engine by filtering dust and debris
out of intake air.
H - Water Inlet — Connection for garden hose.
J - Pump — Develops high pressure.
K - Detergent Siphoning Tube/Filter — Use to siphon
pressure washer safe detergents into the low pressure
stream.
L - Oil Fill/Dipstick — Check and fill with oil here.
M- Nozzle Extension with Quick Connect — Allows you to
switch between four different nozzles.
N - Fold Down Handle — Handle and accessory tray fold flat
atop cold engine for space-saving storage.
P - Hose Wrap and High Pressure Hose — Hose wrap
provides easy transport and handling of the high
pressure hose. Connect one end of hose to water pump
and the other end to spray gun.
R - Project Pro™ Nozzles — Detergent, 0°, 15° and 40°: for
various high pressure cleaning applications.
Items Not Shown:
Identification Label (near rear of base plate) — Provides
model and serial number of pressure washer. Please have
these readily available if calling for assistance.
High Pressure Outlet — Connection for high pressure hose.
Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
R
P
N
M
L
K
11