Features And Controls - Briggs & Stratton 2800 PSI Manuel D'utilisation

Briggs & Stratton Generac Generator Discount Parts Call 606-678-9623 or 606-561-4983

Features and Controls

Read this Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
H
A- Spray Tips— Detergent, 0°, 15° and 40°: for various high
pressure cleaning applications.
B - Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
C - Accessory Tray — Provides convenient storage for
standard and optional accessories, such as brushes,
turbo wands, etc.
D - Warning/Operating Instructions Tag — Identifies
hazards and proper procedure to start/stop pressure
washer.
E - Nozzle Extension with Quick Connect — Allows you to
switch between four different nozzles.
F - Choke Lever — Prepares a cold engine for starting.
G - Air Filter — Protects engine by filtering dust and debris
out of intake air.
H - Recoil Starter — Used for starting the engine manually.
J - High Pressure Hose — Connect one end to water pump
and the other end to spray gun.
K - Fuel Valve — Used to turn fuel supply on and off to
engine.
J
www.mymowerparts.com
L
K
,
,
L - Throttle Lever — Sets engine in starting mode for recoil
starter and stops a running engine.
M - Fuel Tank — Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
N - Detergent Siphoning Tube/ Filter — Use to siphon
pressure washer safe detergents into the low pressure
stream.
P - Pump — Develops high pressure.
R - Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
S - Oil Drain — Drain engine oil here.
T - Oil Fill — Check and add engine oil here.
U - High Pressure Outlet — Connection for high pressure
hose.
V - Water Inlet — Connection for garden hose.
Items Not Shown:
Data Tag (under base plate) — Provides model and serial
number of pressure washer. Please have these readily
available if calling for assistance.
M
N
P R
,
S
T
U
V
11