Grounding Instructions; Safety Label - Tennant F14 Manuel De L'opérateur

ENGLISH
- Use manufacturer supplied or approved
replacement parts.
- All repairs must be performed by a
qualified service person.
- Do not modify the machine from its original
design.
- All work must be done with sufficient
lighting and visibility.
- Wear personal protective equipment as
needed.
6. When transporting machine:
- Unplug cord from wall outlet.
- Get assistance when lifting machine. Wear
protective gloves.
- Use tie- down straps to secure machine to
truck or trailer.
- Do not wheel up or down stairs.

GROUNDING INSTRUCTIONS

This machine must be grounded. If it should electrically
malfunction, grounding provides a path of least
resistance for electrical current to reduce the risk of
electrical shock. This machine is equipped with a cord
having an equipment- grounding conductor and
grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed in
accordance with all local codes and ordinances.
SAFETY LABELS
The safety labels appear on the machine in the location indicated. Replace labels if are missing or become damaged
or illegible.
4
WARNING: Improper connection of the
equipment- grounding conductor can result in a
risk of electric shock. Check with a qualified
electrician or service person if you are in doubt as
to whether the outlet is properly grounded. Do not
modify the plug provided with the machine. If it
will not fit the outlet, have a proper outlet installed
by a qualified electrician.
This machine is for use on a nominal 120- volt circuit
and has a grounding attachment plug that looks like the
plug illustrated below. Make sure that the machine is
connected to an outlet having the same configuration
as the plug. No adapter should be used with this
machine.
WARNING LABEL - (p/n 1072022)
Located on backside of control handle.
Grounded
3 Hole Outlet
Grounding Pin
WARNING LABEL - (p/n 1206661)
Located on machine base.
Tennant F14 (03- 2013)