Grounding Instructions - Tennant InstaCure+ Manuel Opérateur Et Piéces

4. When servicing machine:
− Stop on a level surface and apply
wheel lock.
− Unplug cord from wall outlet.
− Use manufacturer supplied or
approved replacement parts.
− Do not power spray or hose off
machine. Electrical malfunction may
occur.
− Allow bulbs to cool for at least 15
minutes before replacing.
− All repairs must be performed by a
qualified service person.
− Do not modify the machine from its
original design.
− Dispose of light bulbs in an
environmentally safe way according to
local waste disposal regulations.
5. When transporting machine:
− Get assistance when lifting machine.
− Unplug cord from wall outlet.
− Use tie−down straps to secure
machine to truck or trailer.
InstaCure+ 9006246 (11−2011)
Home

GROUNDING INSTRUCTIONS

This machine must be grounded. If it should
electrically malfunction, grounding provides a path
of least resistance for electrical current to reduce
the risk of electrical shock. This machine is
equipped with a cord having an
equipment−grounding conductor and grounding
plug. The plug must be plugged into an
appropriate outlet that is properly installed in
accordance with all local codes and ordinances.
This machine is for use on a nominal 120−volt
circuit and has a grounding attachment plug that
looks like the plug illustrated below. Make sure
that the machine is connected to an outlet having
the same configuration as the plug. No adapter
should be used with this machine.
Find... Go To..
OPERATION EN
WARNING: Improper connection of
the equipment−grounding conductor
can result in a risk of electric shock.
Check with a qualified electrician or
service person if you are in doubt as to
whether the outlet is properly grounded.
Do not modify the plug provided with
the machine. If it will not fit the outlet,
have a proper outlet installed by a
qualified electrician.
Grounded
3 Hole Outlet
Ground Pin
3