Grounding Instructions; Warning Labels - Tennant 1530 Manuel De L'opérateur

5. When servicing machine:
- Unplug cord from wall outlet.
- Avoid moving parts. Do not wear loose
jackets, shirts, or sleeves.
- Block machine tires before jacking up.
- Use hoist or jack that will support the
weight of the machine.
- Use manufacturer supplied or approved
replacement parts.
- All repairs must be performed by a
qualified service person.
- Do not modify the machine from it's
original design.
6. When transporting machine:
- Turn machine off.
- Get assistance when lifting machine.
- Unplug cord from wall outlet.
- Use a recommended ramp when
loading/unloading into/off truck or trailer.
- Use tie- down straps to secure machine to
truck or trailer.

WARNING LABELS

The warning labels appear on the machine in the locations indicated.
Replace labels if they become damaged or illegible.
WARNING LABEL -
LOCATED ON
RECOVERY TANK
COVER.
MOVING PARTS LABEL -
LOCATED ON BRUSH BASE.
Turn off power before working
on machine.
Tennant 1530 (04- 07)
WARNING: Moving parts.

GROUNDING INSTRUCTIONS

Machine must be grounded. If it should
malfunction or breakdown, grounding provides a
path of least resistance for electrical current to
reduce the risk of electrical shock. This machine
is equipped with a cord having an
equipment- grounding conductor and grounding
plug. The plug must be plugged into an
appropriate outlet that is properly installed in
accordance with all local codes and ordinances.
Do not remove ground pin; if missing, replace
plug before use.
Grounded
3 Hole Outlet
Ground Pin
PINCH POINT HAZARD LABEL -
LOCATED ON THE ACTUATOR
MOUNTING BRACKET
WARNING: Actuator pinch point.
Stay clear of brush head lift area.
OPERATION
5