Connecting Power Cord; Operating Machine - Tennant F14 Manuel De L'opérateur

CONNECTING POWER CORD

1. Connect the supplied power cord into the machine
and rotate the plug clockwise to lock plug
connection (Figure 6).
2. Plug the power cord into a properly grounded wall
outlet (Figure 7).
FOR SAFETY: Do not operate machine unless
power cord is properly grounded.
FIG. 6
WARNING: To Reduce the Risk of Fire,
Explosion, Electric Shock or Injury Do Not Operate
with Damaged Power Cord.
FOR SAFETY: Do not operate machine with a
second extension cord unless cord rating is suitable
for machine.
3. When machine is not in use, neatly wrap the power
cord around the handle and cord hook (Figure 8).
FIG. 8
Tennant F14 (12- 2012)
Grounded
3 Hole Outlet
Grounding Pin
FIG. 7

OPERATING MACHINE

FOR SAFETY: Do not operate machine unless
operator manual is read and understood.
1. Place the machine on a level surface and hold the
control handles so the scrub head is parallel to the
floor.
2. To start machine, grasp the control handles, push the
trigger lock switch forward and pull the left or right
start trigger (Figure 9). Release the trigger lock
switch once machine starts.
ATTENTION: Use caution at start up, the machine
may jolt.
3. To begin scrubbing, guide the machine slowly with
a forward or backwards motion (Figure 10). Do not
operate the machine on one spot for an extended
period, floor damage may result.
FIG. 10
ATTENTION: Use caution when working near tile cove
and floor mounted fixtures such as porcelain toilets,
pedestal sinks and other breakable items. Keep the
metal scrub head edge away to avoid possible
damage (Figure 11).
FIG. 11
ENGLISH
FIG. 9
Tile Cove
7