Operation; User Interface - Magmaweld RS 350 M PRO Manuel D'utilisation

RS 350 M / MW PRO - RS 450 M / MW PRO - RS 550 M / MW PRO

OPERATION

3.1 User Interface

Digital Display
Enables monitoring of Current / Wire Feed Speed and Function settings,
• Indicates the wire feed speed when no welding is performed.
• Indicates "0" when the torch is pressed in idle position (without welding).
• Provides welding current during welding
Digital Display
Enables monitoring of Voltage and Function settings,
• Displays '"0" when no welding is performed.
• When the torch trigger is pressed in idle position (without welding), the idle operating voltage is displayed.
• Displays the welding voltage during welding
Thermal Led
Protection alert when the machine is overheated.
Menu Button
• Pressing the button for 3 seconds will access the menus and each press will change the function. Select the desired
setting with the help of the adjustment button.
Adjustment Button
• Changes the parameter and function settings.
• In normal mode, the wire feed speed is changed with the (idle) control knob.
www.magmaweld.com
/ /
USER MANUAL | MANUEL D'UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
Operation 21
EN